Admin Router Red Ipo Networks

Admin router red ipo networks

The following table displays the factory default settings of your R7000 router.

Feature

Default Behavior

Router login

User login URL

www.routerlogin.com or www.routerlogin.net

User name (case-sensitive)

admin

Login password (case-sensitive)

password

Internet connection

WAN MAC address

Use default hardware address

WAN MTU size

1500

Port speed

AutoSensing

Local network (LAN)

LAN IP

192.168.1.1

Subnet mask

255.255.255.0

DHCP server

Enabled

DHCP range

192.168.1.2 to 192.168.1.254

Time zone

Pacific time

DHCP starting IP address

192.168.1.2

DHCP ending IP address

192.168.1.254

DMZ

Disabled

Time zone

GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA

Time zone adjust for daylight savings time

Disabled

SNMP

Disabled

Firewall

Inbound (communications coming in from the Internet)

Disabled (except traffic on port 80, the HTTP port)

Outbound (communications going out to the Internet)

Enabled (all)

Source MAC filtering

Disabled

Wireless

Wireless communication

Enabled

SSID name

See router label

Security

WPA2-PSK (AES)

Broadcast SSID

Enabled

Transmission speed

Auto*

Country/region

United States in the US; otherwise varies by region

RF channel

6 until region selected

Operating mode

Up to 600 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz

* Maximum wireless signal rate derived from IEEE Standard 802.11 specifications.

How To Access 192.168.1.1 Router Login Page?

Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

 

Last Updated:09/12/2018 | Article ID: 24340

Was this article helpful?

Yes No

Admin router red ipo networks